Thank you, Matt. I did try to pip install larixite but it doesn’t seem to work for some reason. So I tried to directly build it after downloading the app. Still It seems not to be working. Below is the output. Sorry for this inconvenience. A. 

ZjQcmQRYFpfptBannerStart

This Message Is From an External Sender

This message came from outside your organization.

 

ZjQcmQRYFpfptBannerEnd

Thank you, Matt.

 

I did try to pip install larixite but it doesn’t seem to work for some reason. So I tried to directly build it after downloading the app. Still It seems not to be working.

Below is the output.

 

Sorry for this inconvenience.

A.

 

With pip install larixite

 

 

 

 

From: Matt Newville <newville@cars.uchicago.edu>
Sent: November 14, 2024 12:50 PM
To: XAFS Analysis using Ifeffit <ifeffit@millenia.cars.aps.anl.gov>
Cc: Anis Attiaoui <anatt@stanford.edu>
Subject: Re: [Ifeffit] Generating feff.inp from .cif file issues

 

Hi Anis, 

 

I think we fixed a few problems that might apply here for larixite.   This CIF file should work if you upload it to

     https://millenia.cars.aps.anl.gov/larixite/

 

When I do this, it seems like it works fine.  See:

    https://millenia.cars.aps.anl.gov/larixite/cifs/Ge0.9Sn0.1-1728-atom-T900K-snapshot-21900.cif

 

We intend that xraylarch will use this newer code soon.

 

 

 

 

 

On Thu, Nov 14, 2024 at 12:32 PM Anis Attiaoui via Ifeffit <ifeffit@millenia.cars.aps.anl.gov> wrote:

Dear Ifeffit Community, I am struggling to generate the feff. inp file using the following .cif file (attached). I am using py-Larch for this project. I tried using these 2 functions: from larch. xrd. cif2feff import cif2feffinp and from larch. xrd. structure2feff

ZjQcmQRYFpfptBannerStart

This Message Is From an External Sender

This message came from outside your organization.

 

ZjQcmQRYFpfptBannerEnd

Dear Ifeffit Community,

 

I am struggling to generate the feff.inp file using the following .cif file (attached).

I am using py-Larch for this project.

 

I tried using these 2 functions: from larch.xrd.cif2feff import cif2feffinp and from larch.xrd.structure2feff import structure2feffinp.

For some reason both of them, they cannot seem to read the cif cluster file (attached).

 

The snippet of the code I am using is :
inp_file = cif2feffinp(cif_file, 'Sn', edge='K', absorber_site=1, version8=False)

I am trying to generating inp_file using feff6.

 

I keep getting the error output of inp_file: “# could not read CIF file”.

I am wondering if this is because the .cif file is bad or there is sthg else going on.

 

Any suggestions will be tremendously helpful.

Best regards,

Dr. Anis Attiaoui,   Stanford University, GLAM Dept. Material Science and Engineering, McCullough Building, 476 Lomita Mall, Stanford California, USA, 94305 Office/shipping: McC-203 Tel: +1(650)485-0501 Web: https://mcintyre.stanford.edu

 

 

ifeffit mailing list:  https://millenia.cars.aps.anl.gov/mailman3/lists/ifeffit.millenia.cars.aps.anl.gov/
to unsubscribe, send mail to ifeffit-leave@millenia.cars.aps.anl.gov

 

--

--Matt Newville <newville at cars.uchicago.edu> 630-327-7411

ifeffit mailing list:  https://millenia.cars.aps.anl.gov/mailman3/lists/ifeffit.millenia.cars.aps.anl.gov/
to unsubscribe, send mail to ifeffit-leave@millenia.cars.aps.anl.gov