On 4/29/05, Ning Yang <nyang@aps.anl.gov> wrote:

Bruce and Mahendra,

One thing I noticed before was if you want to save the sum(not fit) as a
chi of K, you need to highlight both of the datafile (****.chi) and the
"sum" and then click "save fit as". If either the datafile (****.chi) or
the "sum" not highlighted, the sum won't be saved and the file has
nothing inside. But this seems to be not true to the actual fit. You can
always save the fit by clicking the same button no matter where the
highlighted bar is.

Hope this help.

Ning

Ning Yang
Postdoc at Unicat
438/E002
Advanced Photon Source
Argonne National Laboratory
630-252-0884

-----Original Message-----
From: ifeffit-bounces@millenia.cars.aps.anl.gov
[mailto: ifeffit-bounces@millenia.cars.aps.anl.gov] On Behalf Of Bruce
Ravel
Sent: Friday, April 29, 2005 2:41 PM
To: XAFS Analysis using Ifeffit
Subject: [Ifeffit] Fwd: help about Arthemis

Mahendra,

I am forwarding your question and my answer to the Ifeffit mailing list.
I
recommend that you make use of that resource for your EXAFS and analysis
software questions.

Once you make the sum of paths, you should find that, in the File menu,
the
menu item for "Save fit as" is enabled.  I acknowledge that is somewhat
confusing -- you made a summation, not a fit..  But as far as Artemis is
concerned, summations and fits are very similar.  In any case, you can
use
that item in the File menu to save your summation in k, R, or q space.

There is a small bug in there.  If you have not imported data yet, you
can
still save the summation in the manner I described, but the information
written to the header will be incorrect.  That will not preclude using
the
file, however.

Hope that helps,
B

----------  Forwarded Message  ----------

Subject: help about Arthemis
Date: Friday 29 April 2005 15:19
From: koppolu uma mahendra kumar <mahixs@gmail.com>
To: ravel@phys.washington.edu

Dear Dr.Bruce Ravel,
                 i am a new user of Arthemis.
i calculated an exafs signal using phase and amplitudes calculated from
Feff. i used the option "sum of paths(no fit)" in Arthemis.
i am not able to save this as an ascii file.
Please help me to go ahead.
thanking you
mahendra kumar

-------------------------------------------------------

--
Bruce Ravel  ----------------------------------- bravel@anl.gov  -or-

ravel@phys.washington.edu
Environmental Research Division, Building 203, Room E-165
Argonne National Laboratory                        phone: (1) 630 252
5033
Argonne IL 60439, USA                                fax: (1) 630 252
9793

My homepage:    http://feff.phys.washington.edu/~ravel
EXAFS software: http://feff.phys.washington.edu/~ravel/software/exafs/

_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit

_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit