Hello, 


I work with a Windows computer and my data is like in the attached file data5.txt. Some days ago with an old version of Demeter (I think 0.9.18 but I'm not sure) I could have the plots I attach in Plot1.png and Plot2.png, but I don't know why there were some options in the program which were blocked (like forward Fourier transform parameters, rbkg, spline...). So I decided to install the latest version of Demeter (0.9.24) and then instead of obtaining the same plots I can only get the ones in Plot3.png and Plot4.png. They are not labeled and it also doesn't appear an E or pointer to choose values directly in the plot. 


Someone knows how to obtain again plots similar to 1 and 2?


Thank you very much, 

best regards. 


Irina Pi. 

From: Ifeffit <ifeffit-bounces@millenia.cars.aps.anl.gov> on behalf of Bruce Ravel <bravel@bnl.gov>
Sent: 22 July 2016 04:22:42
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] Help with Athena
 
On 07/22/2016 11:05 AM, Irina Pi wrote:
> I am just getting started with XAFS projects and I am using Athena
> software for processing and analysing the data. I am learning how to use
> it, and I have a little problem. The thing is that when I plot the XANES
> data, the automatic created plot is not labeled and plus it doesn't have
> the option of selecting a point of the spectrum. I mean, when I want to
> choose E0 for example, I need to do it changing the number in the Athena
> screen, and I don't know exactly what I am choosing because it doesn't
> appear anything in the graph. Was I clear? Do you know any way which I
> could solve it?

Irina,

You have not provided quite enough information for us to understand
the nature of your problem.  Here are some hints on asking good
questions on the mailing list:

   http://bruceravel.github.io/demeter/documents/SinglePage/bugs.html
   http://bruceravel.github.io/demeter/documents/SinglePage/help.html

In this case, it would help to know:

  * what kind of computer you are using.  if the answer is a mac, your
    question is answered explicitly on the Demeter home page,
    http://bruceravel.github.io/demeter/#mac -- scroll down to the
    troubleshooting section

  * I don't understand the label situation.  It would help if you
    attached a picture (not a Word document, not a powerpoint file, but
    a picture) showing us what you are seeing.

  * it may even be helpful to see a project file that demonstrates your
    issue -- that allows someone to reproduce and observe the problem

In any case, even without being able to pluck a point from the plot,
you have figured out the sensible work-around.

B


--
  Bruce Ravel  ------------------------------------ bravel@bnl.gov

  National Institute of Standards and Technology
  Synchrotron Science Group at NSLS-II
  Building 743, Room 114
  Upton NY, 11973

  Homepage:    http://bruceravel.github.io/home/
  Software:    https://github.com/bruceravel
  Demeter:     http://bruceravel.github.io/demeter/
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit