Bruce,
Please accept my apologies for a lack of sufficient information in above email. I have tried to install program in other computer and import those data files, I found that it worked properly as usual!! I personally think it is a problem with my own laptop that Athena column window, which we use to choose the corresponding nominator and denominator cannot be shown, or may be hidden somewhere else. This led to unsuccessful importing data in my case, therefore, it showed the red message "You have not used any memory yet" and program cannot be closed.
I am trying to figure out my laptop problem. Anyway, I gratefully thank for your attempt to assist my difficulties.
Nirawat.
2008/9/3 Bruce Ravel
<bravel@bnl.gov>
On Wednesday 03 September 2008 15:20:31 you wrote:
> Thank you for your prompt response. I tried to import weird format files,
> Athena shown a box that said it cannot open those file. It is different
> from the problem I mentioned above that there was no any box, it just
> posted with a red messege in the bottom that 'You have not used any memory
> yet'. I tried with Athemis prj file, too. There was also a box said it
> cannot open because it seems to be an artemis file. And one more thing,
> once that red messege appeared, I cannot close Athena window anymore - it
> seems non-response for closing. Before this, It could open all of these raw
> data files. But, now it happens to me very strange. However, it can
> normally import Athena project files, just only the project files, that I
> have worked and saved.
As I often say here on the list, I cannot fix a problem that I cannot
replicate on my own computer. What you are describing is completely
unfamiliar to me. Unless you can give me an example file to replicate
what you are seeing, I won't be able to help you very much.
--
Nirawat Thammajak
Research and Academic Division,
National Synchrotron Research Center,
PO Box 93, Nakhon Ratchasima 30000 Thailand.
Tel. (+66) 044-217040 ext. 504
Fax (+66) 044-217047