Dear Bruce,


First of all, thank you for your response.


I did not update Mint, I installed a fresh version (formated the drive, installed a new version, remounted my data partitions, including the home folder, and reinstalled all the packages from the repositories), sorry if I did not make it clear enough in the first email. The demeter folder in the home folder was carried over from the old linux version, but I downloaded the newest version from the github repo. I would think this is basically equal to starting with a blank OS. Anyway, I did try the ./Build touch_wrapper command without any success (same tests failed if I remember correctly).

As you asked me about athena crashing, for the purpose of testing it, I went on and installed athena despite the errors in the ./Build test command (without downloading the new version from the github repo). This is the terminal output:

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Attribute (bkg_nc0) does not pass the type constraint because: Validation failed for 'LaxNum' with value 0,34568900723742 at accessor Demeter::Data::bkg_nc0 (defined at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data.pm line 310) line 4
    Demeter::Data::bkg_nc0('Demeter::Data=HASH(0xcf3fd70)', '0,34568900723742') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/Mu.pm line 323
    Demeter::Data::Mu::normalize('Demeter::Data=HASH(0xcf3fd70)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data.pm line 717
    Demeter::Data::_update('Demeter::Data=HASH(0xcf3fd70)', 'fft') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/Plot.pm line 24
    Demeter::Data::Plot::plot('Demeter::Data=HASH(0xcf3fd70)', 'E') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 2177
    Demeter::UI::Athena::plot('Demeter::UI::Athena=HASH(0x1a65618)', '', '', 'E', 'single') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 2376
    Demeter::UI::Athena::quadplot('Demeter::UI::Athena=HASH(0x1a65618)', 'Demeter::Data=HASH(0xcf3fd70)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 238
    Demeter::UI::Athena::IO::Import_plot('Demeter::UI::Athena=HASH(0x1a65618)', 'Demeter::Data=HASH(0xcf3fd70)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 813
    Demeter::UI::Athena::IO::_prj('Demeter::UI::Athena=HASH(0x1a65618)', '/home/stevan/Documents/.../athenaprojectname.prj', '/home/stevan/Documents/.../athenaprojectname.prj', 1, '') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 164
    Demeter::UI::Athena::IO::Import('Demeter::UI::Athena=HASH(0x1a65618)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 857
    Demeter::UI::Athena::OnMenuClick('Wx::Frame=HASH(0x19a2980)', 'Wx::CommandEvent=SCALAR(0xcf2b6d0)', 'Demeter::UI::Athena=HASH(0x1a65618)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 780
    Demeter::UI::Athena::__ANON__('Wx::Frame=HASH(0x19a2980)', 'Wx::CommandEvent=SCALAR(0xcf2b6d0)') called at /home/stevan/perl5/bin/dathena line 39
    eval {...} at /home/stevan/perl5/bin/dathena line 39

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


After removing demeter and perl5 folders from the home directory, downloading the latest packages from the github repo and building from scratch, all test were successful in the ./Build test step. Demeter installed without problems. But, athena still crashes when I try to open a project or import any data. This is the terminal output (this time after trying to import data in .dat format):

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Attribute (bkg_e0) does not pass the type constraint because: Validation failed for 'LaxNum' with value 1582,00000 at accessor Demeter::Data::bkg_e0 (defined at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data.pm line 226) line 7
    Demeter::Data::bkg_e0('Demeter::Data=HASH(0xe5ca148)', '1582,00000') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/E0.pm line 67
    Demeter::Data::E0::e0_ifeffit('Demeter::Data=HASH(0xe5ca148)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/E0.pm line 37
    Demeter::Data::E0::e0('Demeter::Data=HASH(0xe5ca148)', 'ifeffit') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/Mu.pm line 289
    Demeter::Data::Mu::initialize_e0('Demeter::Data=HASH(0xe5ca148)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data/Mu.pm line 270
    Demeter::Data::Mu::put_data('Demeter::Data=HASH(0xe5ca148)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/Data.pm line 732
    Demeter::Data::_update('Demeter::Data=HASH(0xe5ca148)', 'all') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 603
    Demeter::UI::Athena::IO::_group('Demeter::UI::Athena=HASH(0x1d0d640)', 'Demeter::UI::Athena::ColumnSelection=HASH(0xe602810)', 'Demeter::Data=HASH(0xe5ca148)', 'HASH(0xe5c5f08)', '/home/stevan/Documents/Project/Samples/XAFS/Samples-Canada/SO-58/Al-K/SO-58-XAS_1.dat', '/home/stevan/Documents/Project/Samples/XAFS/Samples-Canada/SO-58/Al-K/SO-58-XAS_1.dat', 0, 0) called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 486
    Demeter::UI::Athena::IO::_data('Demeter::UI::Athena=HASH(0x1d0d640)', '/home/stevan/Documents/Project/Samples/XAFS/Samples-Canada/SO-58/Al-K/SO-58-XAS_1.dat', '/home/stevan/Documents/Project/Samples/XAFS/Samples-Canada/SO-58/Al-K/SO-58-XAS_1.dat', 1, 0) called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena/IO.pm line 165
    Demeter::UI::Athena::IO::Import('Demeter::UI::Athena=HASH(0x1d0d640)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 857
    Demeter::UI::Athena::OnMenuClick('Wx::Frame=HASH(0x1c77980)', 'Wx::CommandEvent=SCALAR(0xd200dd0)', 'Demeter::UI::Athena=HASH(0x1d0d640)') called at /home/stevan/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Demeter/UI/Athena.pm line 780
    Demeter::UI::Athena::__ANON__('Wx::Frame=HASH(0x1c77980)', 'Wx::CommandEvent=SCALAR(0xd200dd0)') called at /home/stevan/perl5/bin/dathena line 39
    eval {...} at /home/stevan/perl5/bin/dathena line 39

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Doing ./Build touch_wrapper does not change anything - all tests pass, demeter installs, but athena crashes again...

Looking forward to your reply and suggestions on how to solve this problem.


Kind regards,
Stevan

--
Stevan Ognjanovic, Dipl.-Ing.

Nanoparticle Process Technology
Department of Engineering Sciences
University Duisburg-Essen
Lotharstraße 1, MA 349
D-47057 Duisburg

Phone: +49 (0)203 379 1783
Mobile phone: +49 (0)157 3820 6890
Fax: +49 (0)203 379 4453
web: www.nppt.de
e-mail: stevan.ognjanovic@uni-due.de