Hi Bruce,

I don't think I've changed any defaults in my colors, but I went ahead and messed around with them to no avail--the program still looks the same. Please let me know if there are any other tests I can run. I have tried removing and uninstalling MacPorts and reinstalling everything and there are no changes in the behavior.

George, thanks for reproducing the problem. I haven't seen anything like it here on the mailing list and was beginning to think I had gone mad.

Best,
Alison


On Fri, Apr 18, 2014 at 5:32 PM, George Sterbinsky <GeorgeSterbinsky@u.northwestern.edu> wrote:
Hi Bruce and Alison,

I am able to confirm the behavior reported by Alison (both bigger and lesser problems) on OSX 10.8.5. Pressing the "transfer displayed path" button causes Artemis to crash and the message below to print to the terminal.

2014-04-18 11:18:26.309 perl5.16[1309:707] *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Can't locate object method "transfer" via package "Wx::Panel" at /opt/local/lib/perl5/site_perl/5.16.1/darwin-thread-multi-2level/Demeter/UI/Artemis/Data.pm line 1126, <F> line 9.



Best,
George




On Thu, Apr 17, 2014 at 3:30 PM, Bruce Ravel <bravel@bnl.gov> wrote:
On 03/24/2014 03:21 PM, Alison Tebo wrote:
I am running Demeter 0.9.18 installed on a Mac 10.6.8 via the (very
helpful!) Macports port. I've had nearly no problems with processing my
data, but Artemis appears very strange. Most of the button can't be seen
and are black instead (I've attached a screenshot). The bigger problem
is that once I run a Feff calculation, I can't seem to transfer the
paths from the Feff Window into the Data Window (see second screenshot).
The program seems to think it's doing it--there are no error messages in
the log and it even makes the little graphic as it 'grabs' the path--but
it never transfers it over to the Data Window.

I have attached a project file where I get this error, the feff input
file that I run the calculation on, and two screenshots of what Artemis
looks like for me. I don't think the input and project file matter much
since this happens for me even with examples from the various courses
Bruce has given.

Any advice would be greatly appreciated.

Hi Alison,

First off, I apologize that it has taken me so long to respond to this.  Busy time.

I don't quite understand the bigger problem.  This is certainly  not a problem I have on other platforms.  Do other Mac users observe the same behavior?

As for the lesser problem, looking at the icons across the top in your screenshots, it would seem that you are using some kind of color theme that is different from a Mac out of the box.  Is that right?  If so, how does the software behave if you change the theme back to the default?

Cheers,
B


--
 Bruce Ravel  ------------------------------------ bravel@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2
 Building 535A
 Upton NY, 11973

 Homepage:    http://xafs.org/BruceRavel
 Software:    https://github.com/bruceravel
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit


_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit