Shaofeng,

so I can not help so much. I can only think if you opened projects from older/other version of demeter - in such case can be problems with back compatibility.
In Artemis the phase correction is done to the one of nearest type of ions, thus you have to have already loaded FEFF calculations (paths).

regards
kicaj

W dniu 13-02-19 17:51, wangshaofeng@iae.ac.cn pisze:
kicaj,

I use demeter 0.9.14. In athena, I marked the phase correction field, but no change of R space curve was found.
In artemis, the phase correction field is gray and can not be marked.

Thanks

Shaofeng



-----原始邮件-----
发件人: "\"Dr. Dariusz A. Zając\"" <kicaj@ifj.edu.pl>
发送时间: 2013年2月20日 星期三
收件人: "XAFS Analysis using Ifeffit" <ifeffit@millenia.cars.aps.anl.gov>
抄送:
主题: Re: [Ifeffit] phase correction

Shaofeng,

would be nice if you would specify you question/problem.
I use Artemis and Athena, both 0.8.xxx
In Athena I mark the field of "Phase correction" in the window of Forward Fourier transform.
In Artemis you have to load first experimental data and the Feff paths, then in the card of experimental data (you mark experimental data) in the window of "other parameters" you select the "path to use for phase correction"

cheers
kicaj

W dniu 13-02-19 16:52, wangshaofeng@iae.ac.cn pisze:

Hi Bruce,

How can I open the phase correction function in fitting using demeter athena and artemis?

cheers,

Shaofeng






_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit








_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit