Dear Maurizio, Matt,

I just checked why some older files from my beamline work correctly while the newer ones are not identified as xas data. After your explanation the reason is quite simple. In the old format the last line of the header was

#enc_energy mono_energy mono_bragg Step_Pos mono_X1vert....

After rewriting major parts of the beamline software among other things the last line of the header changed to:

# E_enc E_step Bragg_enc Bragg_step...

Once I replace E_enc with something like energy_enc or enc_energy the data is correctly identified as xas data.

So, the easiest solution for data taken at P65 is that I will change the header in the data file so that the first column has a name that contains "energy". I think i remember that Athena was looking for the first column were the value of every point n+1 is larger than the value of point n. it then usually correctly identified that column to be the energy axis. However, I think labeling the columns correctly, that means following common accepted conventions, is much easier than programming a bunch of complicated fail safe energy axis recognising procedures. 

Cheers,

Edmund



On 28.02.23 18:16, Matt Newville wrote:
Hi Siebe, 

Just to agree with Edmund and Mauro:  selecting "energy" and changing data type from "raw" to "XAS" should help.  But, you would have to do this for every file, which is not ideal.

The file reader is trying to guess whether data is in energy (and if so, what units are used) and whether it is really XAS data or some other kind of data. I suspect that it is defaulting to "raw" because the energy column is not labeled "energy", but "col1" -- it sort of looks like the reader is not doing a good job of guessing what the columns mean.

Posting a file would help diagnose why it is guessing wrong.  The file reading does try to guess what beamline a data file came from, so if you send a file, maybe we can add enough hints for files from that beamline to work more reliably.



On Tue, Feb 28, 2023 at 6:37 AM Welter, Edmund <edmund.welter@desy.de> wrote:
Dear Siebe,

did you try to change the data type from "raw" to XAS. If you click on the small arrow on the right you should have the choice between xas and raw. On my computer that works and after that I can choose the unit for the X-axis. For some reason "raw" seems to be the preset choice. Maybe Matt could change that, I fell into this trap several times.

Cheers,
Edmund

From: "van der Veer, Siebe" <s.van.der.veer@rug.nl>
To: "XAFS Analysis using Ifeffit" <ifeffit@millenia.cars.aps.anl.gov>
Sent: Tuesday, 28 February, 2023 13:16:18
Subject: [Ifeffit] XAS viewer unit detection during data reading

Dear all,
I am not sure if this mailing list is the correct medium for this question. Apologies, if not.

I am looking to import files in XAS viewer, which worked fine in ATHENA, but in XAS viewer the correct units of the data are not detected and I cannot manually change them. I can get a plot of the data, but the data is not recognized by the software as XAS data, i.e. a lot of plotting/conversion options do not show.

I hope the following screenshots provide sufficient information to illustrate my issue.

Reading in a .dat file of fluorescence data. I can't change the units in the marked area.

image.png

The data can be read into the XAS viewer, but I don't have the regular plotting options in these dropdown menus.

image.png

Any advice would be much appreciated.

Kind regards,


--
Siebe van der Veer | PhD student
Nanostructures of Functional Oxides | Zernike Institute for Advanced Materials
University of Groningen | Nijenborgh 4, 9747 AG Groningen | The Netherlands

_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


--
--Matt Newville <newville at cars.uchicago.edu> 630-327-7411

_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit