Move E0 past the white line and that should fix the problem. 

Chris

Sent from my iPhone

On Aug 29, 2014, at 3:13 AM, Matthias Filez <Matthias.Filez@ugent.be> wrote:

Dear mailing list users,
 
I am trying to fit the spline background function in a proper way to a spectrum (Ga K edge, see attached).
However, it doesn't seem to work out, but I don't see why.
 
I already tried the following:
* Vary the Rbkg value
* Change spline k-weight
* Change k-range of spline fitting
* Alter the strength of spline clamps
... and the combination of these effects.
 
Since there is a strong white line, I suspect this causes the spline misfit. The data quality is OK.
If you have any idea, please post it.
 
Thanks in advance,
Matthias

_____________________

Matthias Filez

Laboratory for Chemical Technology

Department of Chemical Engineering

Ghent University

 

Technologiepark 914, B-9052 Zwijnaarde, Belgium
+32 (0)9 33 11721
www.lct.ugent.be

Disclaimer: http://helpdesk.UGent.be/e-maildisclaimer.php

<r122043.prj>
<r122043.dat>
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit